Cordless, job-site-ready anchor nailer for fast, precise fixing of metal connector plates, straps, and joist hangers. The KA 4060 GAS 3G drives 34° plastic-collated 4.0 mm anchor nails from 40–60 mm with a centring tip for pinpoint placement, adjustable depth control, and very low recoil. Gas fuel plus Li-ion power deliver high shot counts without compressors or hoses.
Key features
34° positive placement nose for precise driving into connector holes
Adjustable depth control for flush or proud finishes
Non-slip grip with very low recoil; rafter/belt hook
Rear two-step loading for quick reloads
Uses 40–60 mm, 4.0 mm anchor nails (plastic-collated)
Approx. 1,100 shots per fuel cell; up to ~8,000 shots per battery charge
Size 42.5 × 10.8 × 39.3 cm; 4.02 kg
Ideal applications
Joist hangers, straps, and angle brackets
Metal connector plates and wind bracing/drag strip
Timber framing and roof trusses
General structural carpentry where connectors are specified
What’s included
Plastic carry case
2 × Li-ion batteries
Battery charger
| Weight | 4.02 kg |
|---|---|
| Dimensions | 42.5 × 10.8 × 39.3 cm |
| Brand | TJEP |
| Model | KA 4060 GAS 3G |
| Tool Type | Positive Placement Anchor Nailer |
| Angle | 34° |
| Fastener Type | 34° strip anchor nails (plastic-collated) |
| Fastener Length | 40–60 mm |
| Fastener Diameter | 4.0 mm |
| Driving System | Gas (cordless) |
| Shots per Fuel Cell | ca. 1,100 |
| Shots per Battery Charge | ca. 8,000 |
Only logged in customers who have purchased this product may leave a review.
$995.00 + GST
In Stock
Gas PPN anchor nailer, 34°, 40–60 mm, 4.0 mm nails
Centering tip + depth control, low recoil
Quick two-step rear loading
~1,100 shots/fuel; ~8,000 per charge
42.5 × 10.8 × 39.3 cm, 4.02 kg
Cordless, job-site-ready anchor nailer for fast, precise fixing of metal connector plates, straps, and joist hangers. The KA 4060 GAS 3G drives 34° plastic-collated 4.0 mm anchor nails from 40–60 mm with a centring tip for pinpoint placement, adjustable depth control, and very low recoil. Gas fuel plus Li-ion power deliver high shot counts without compressors or hoses.
Key features
34° positive placement nose for precise driving into connector holes
Adjustable depth control for flush or proud finishes
Non-slip grip with very low recoil; rafter/belt hook
Rear two-step loading for quick reloads
Uses 40–60 mm, 4.0 mm anchor nails (plastic-collated)
Approx. 1,100 shots per fuel cell; up to ~8,000 shots per battery charge
Size 42.5 × 10.8 × 39.3 cm; 4.02 kg
Ideal applications
Joist hangers, straps, and angle brackets
Metal connector plates and wind bracing/drag strip
Timber framing and roof trusses
General structural carpentry where connectors are specified
What’s included
Plastic carry case
2 × Li-ion batteries
Battery charger
| Weight | 4.02 kg |
|---|---|
| Dimensions | 42.5 × 10.8 × 39.3 cm |
| Brand | TJEP |
| Model | KA 4060 GAS 3G |
| Tool Type | Positive Placement Anchor Nailer |
| Angle | 34° |
| Fastener Type | 34° strip anchor nails (plastic-collated) |
| Fastener Length | 40–60 mm |
| Fastener Diameter | 4.0 mm |
| Driving System | Gas (cordless) |
| Shots per Fuel Cell | ca. 1,100 |
| Shots per Battery Charge | ca. 8,000 |
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.