Tool Repair Auckland for Nail Guns, Staplers & Compressors
Fast, reliable tool repair in Auckland for nail guns, staplers, compressors and other trade tools. Air Gun Services repairs major brands including Paslode, Senco and Bostitch using genuine parts, workshop testing and proven repair know-how.
Book a repair
Two quick steps. We ring to confirm, usually the same working day.
Rather talk? Ring the workshop on 09 525 6548
- Auckland workshop repairs
- NZ-wide courier repairs
- Genuine parts and bench testing
- Standard service
- $184 + GST
- Most back within
- 2 working days
- Every tool
- Bench-tested
- Brands
- Any make
Expert Tool Repairs & Maintenance
When your tools stop, so does your work. AGS provides tool repairs in Auckland for pneumatic tools, air tools, nail guns, staplers, cordless tools and compressors used across construction, joinery, manufacturing and more.
Air tools
We repair air nailers, pneumatic staplers and bradders of all types. From air leaks to firing issues and worn seals, each tool is cleaned, repaired and bench-tested for reliable performance.
Book a repair
Cordless tools
We repair gas-powered and cordless nail guns, including common ignition, misfire and wear-related faults. Whether it is a Paslode repair or another major brand, the goal is to get the tool firing properly again.
Book a repair
Compressors
We repair portable and workshop compressors used with nail guns, staplers and other air tools. Pressure issues, worn components and performance faults are diagnosed and tested before the unit goes back.
Book a repairFast, Reliable, Transparent: Our Tool Servicing Process
Whether you drop your tool off locally or courier it in, our repair process is built for clarity, speed and zero surprises.
Bring it in or send it in
Drop your tool into our Auckland workshop or courier it in from anywhere in New Zealand. Unsure whether we repair your tool type or brand? Contact us first and we will confirm before you send it.
Inspection and quote
We inspect the tool and confirm what is needed before repair work begins. If additional work is required beyond a standard service, we quote that separately for approval first.
Full service and testing
Once approved, we strip, clean, repair and rebuild the tool as needed, replacing worn parts and testing it properly before it leaves the bench.
Pickup or delivery
Pick your tool up from our Auckland workshop or have it sent back by tracked courier, whichever suits your job and location best.
Authorised Tool Repairs for Paslode, Senco, Bostitch & More
We’re authorised service agents for Paslode, Senco, Bostitch and more, trusted by tradies across New Zealand. Genuine parts where required, brand-approved methods where applicable, and proper bench testing before every tool leaves our Auckland workshop.
We'll fix it right, guaranteed
Every tool is bench-tested before return. If it’s not fixed right, we’ll sort it. No excuses, no muckarounds.
Same-day servicing available
Need it back fast? Ask about our same-day or urgent repair options. We’ll do our best to keep you working.
Convenient central location
Our Penrose workshop is a quick trip from most places in Auckland, making it an easy drop-off.
40+ years industry experience
Trusted since 1984: decades of hands-on experience with Paslode, Senco, Bostitch and all major brands.
Courier from anywhere in NZ
Send it in and we’ll courier it back when it’s ready. Ring first and we’ll walk you through it.
Pricing and turnaround guide
Want the fuller picture before you book? Read the guide to pricing, turnaround and what to expect.
Read the guideNeed Pricing or Turnaround Info Before Booking?
Want the fuller picture before you book? Use the guide below for pricing, turnaround and what to expect, or contact the workshop if you need help with a specific repair.
Standard service cost
Standard tool servicing is $184 + GST per tool, with additional repairs quoted separately if required.
Additional repairs
If extra repair work is needed beyond the standard service, we’ll let you know and quote this separately before going ahead.
Typical turnaround
Many standard servicing jobs are completed quickly, and most services and repairs are turned around within 2 working days.
Read the pricing & turnaround guideGenuine Tool Parts for Leading Brands
We stock a wide range of industry-leading pneumatic and fastening brands, chosen for proven performance on New Zealand worksites. Alongside complete tools and fasteners, we stock and source genuine replacement parts and service components to keep your equipment running reliably.
From Paslode and BeA to Senco, Fasco, KMR, Ecko and more, these are brands we know inside and out, with the parts and servicing support to match.
Parts and servicing for
- Genuine replacement parts
- Service components
- Sourced when not in stock
Common Questions About Tool Repairs
Need a tool while yours is in the shop? Check out our hire options.
09 525 6548Do you only repair Paslode Tools?
We repair tools from Paslode, Senco, Fasco, BeA, Bostitch, Josef Kihlberg and more. Not sure if yours qualifies? Just ask and we’ll let you know.
Do I need to book a time to drop my tool in?
No, just bring it in during business hours. If you’re sending it by courier, include your contact details and we’ll be in touch when it arrives.
Can I send my tool by courier?
Yes. We service tools from anywhere in New Zealand: just book a repair and we’ll send packing and courier instructions.
Can I get a tool on loan while mine is being repaired?
Yes, check our Tool Hire page. If we have a suitable loan tool available, we’re happy to help you out so you can keep working while your tool is being serviced.
Can you do same-day or urgent repairs?
We can in many cases, just give us a call first to confirm availability. Same-day turnaround depends on workload and parts.
How long does a typical repair take?
Most tool repairs are completed within 2–3 working days once approved. Larger rebuilds may take slightly longer depending on parts availability.
How do I know if it's time to get my tool serviced?
Check out our Tool Care section, or our Workshop Blog to learn more about what warrants a service for your tool.
Do you offer a warranty on repairs?
Yes, every tool is bench-tested before it leaves. If anything’s not right, we’ll fix it.
Don’t Just Take Our Word for It…
Hear What Our Customers Have to Say
4.7 out of 5 from 19 Google reviews
I took my sick nail gun to get some parts… Even though my nail gun was old as the hills, they were able to service the wee thing and get it going like new (well, as new as an old gun can get). So appreciative of the quality of the workmanship. They also had some brads that you just do not get in the big box stores… Would definitely go back if I need any further nail gun help. A+++
Very good, did a repair on the spot for me.
These guys are the best. Kevin will look after you for nail gun and other similar services / parts etc.
Always good service. Honest appraisal.
Absolutely fantastic customer service, really going the extra mile. A huge thanks to Martin, Scott and the team.
Drop it off at the workshop
Walk in during business hours, no booking needed. Or fill in the job card and courier it from anywhere in New Zealand.
- 1 Beasley AvenuePenrose, Auckland 1061
- OpenWeekdays 7:30am to 5pm
- Call09 525 6548
Ready to Book Your Repair?
Don’t let downtime cost you jobs. Book your tool repair with AGS: Auckland’s trusted specialists in power tool, nail gun and compressor servicing.